Topic: Bedroom TV in 2022 Unity Island Bed. (Read 773 times) previous topic - next topic

The HDMI and Coax connecting cables became disconnected from the bedroom TV in my 2022 Unity Island Bed model.  They cannot be reconnected properly without removing the TV to access the back of the TV.  How do you remove the TV from the mounting bracket?  Is there a lever behind the TV that releases it from the wall bracket?  A picture of where it is would be helpful.  The Coax should not have become disconnected since it is screwed to the male connector, so it may not have been properly connected at the factory.

Thanks for any replies.

There is a lever on the lower part of the mount that allows the RV to pivot.  I will see if a picture is possible.  As I recall the mount is to the right of the main support.  I had to remount the bracket because the left side was no longer secure to the wall and until I found the lever, plugging in the cable and ROKU was a real challenge.  I will post it if I can get a reasonable image--in short once the lever is found, replugging or even taking the whole mount down is not as bad a chore as you might suppose.