Topic: 2015 Unity Tail light Assembly  (Read 612 times) previous topic - next topic

The right twilight assembly for my 2015 Unity is coming loose. I can easily repair if I can get the assembly off the vehicle, but there is no apparent way to get to the back of the assembly. Any suggestions on how to reach the nuts holding it on without disassembling the interior paneling? I did get under the van, but any bolts seem out of reach. In the meantime time, it is taped on.

Huzzah, I answered my own question. If this ever happens to you, gently pry the side marker light cover off (led light on my van).This exposes the heads of two screws, that on my van require a square screwdriver bit. Remove the screws and gently slide the whole taillight assembly to the outside. The other two fasteners attach to a bracket that fits into a recess in the body and is released from the van when you slide it out. If you are replacing the assembly, you can now disconnect the wiring from all of the lights and install the new assembly. In my case, I just needed to JB weld the attachment fitting back onto the plastic. I did confirm that it is impossible to get to the back of the taillight assembly from inside the camper body.